Forged Reducer Street Elbow 90°

 

Parts#	Size	Tectran	Fleet Pride	Fairview	Midland
1154-CD	1/8*1/4			116-AB	28259
1154-DC	1/4*1/8	115F-BA	BP116-4-2	116-BA	28260
1154-DE	1/4*3/8				28261
1154-ED	3/8*1/4	115F-CB		116-CB	28262
1154-EF	3/8*1/2			116-CD	28263
1154-FE	1/2*3/8	115F-DC	BP116-8-6	116-DC	28264

 

 

Forged Reducer Street Elbow 90°is a precision pipe fitting that integrates high strength, variable diameter, and turning.

 

 

Reducing design: One end has a large-sized external thread, and the other end has a small-sized internal thread, while achieving pipeline diameter reduction+90 ° turning.
Forging process: Using hot forging or cold forging brass, with no pores, high density, and strength more than 30% higher than castings.

 

 

Space optimization: Replace the combination of "elbow+variable diameter joint" with a single piece to reduce leakage points.

High pressure tolerance: With a pressure bearing capacity of 1000-1200 PSI, it is suitable for steam and hydraulic systems.

Flow control: Reduce turbulence and pressure loss by gradually reducing diameter design (longer radius type is better).

 

 

1. Check the thread specifications to ensure compatibility with the pipeline system.

2. Clean the threads, remove stains or old sealing materials.

3. Wrap the threaded end with raw material tape or apply pipeline sealant to enhance the sealing effect.

4. Manually screw in the connecting fittings to ensure alignment with the correct thread direction.

5. Use a wrench to tighten appropriately, but avoid excessive force.

6. After installation, conduct a leak test to ensure that there is no leakage at the connection.

 

 

Attention should be paid when purchasing:

Does the thread standard match (NPT, BSP, G)

Does the thread size meet the requirements of the pipeline

Should forged brass be used to avoid low-quality castings

Do you need special surface treatments (nickel plating, chrome plating) to improve corrosion resistance

Does it comply with UL, NSF, ISO certifications to ensure reliable quality

 

Yes, brass material is heat-resistant and suitable for hot and cold water systems, but it is necessary to ensure that the maximum temperature of the piping system does not exceed the working range of brass (generally between -20℃ and 200℃).

 

Hot Tags: forged reducer street elbow 90°, China forged reducer street elbow 90° manufacturers, suppliers, factory, Push In Female Connector DOT Approved, Hydraulic compression cap, forged Three way pipe female connector, Long Street Ells for Hydraulics, Compression Shut Off Valve, ABC Newline TM Push In Coupling