DOT Push In Union Tee
| Parts# | Tube O.D | PARKER | EATON | ALKON | MAF | GATES | Norgren |
| 2693-2 | 1/8 | ||||||
| 2693-13 | 5/32 | 164PTC-5/32* | |||||
| 2693-3 | 3/16 | 164PTC-3* | |||||
| 2693-4 | 1/4 | 164PTC-4 | 1864x4 | AQ64-DOT-4 | 640400 | G56450-0404 | 94451404M |
| 2693-6 | 3/8 | 164PTC-6 | 1864x6 | AQ64-DOT-6 | 640600 | G564 50-0606 | 94451406M |
| 2693-8 | 1/2 | 164PTC-8 | 1864x8 | AQ64-DOT-8 | 640800 | G56450-0808 | 94451407M |
| 2693-10 | 5/8 | 164PTC-10 | AQ64-DOT-10 | 641 000 | G56450-1010 | 94451408M | |
| 2693-12 | 3/4 | AQ64-DOT-12 | 641200 | G56450-1212 | |||
| 2693-4-6 | 1/4*1/4*3/8 | ||||||
| 2693-6-4 | 3/8*3/8*1/4 | 164PTC-6-6-4 | |||||
| 2693-6-13 | 3/8*3/8*5/32 |
| Parts# | Tube O.D | Tectran | Automann | Fleet Pride | Fairview | Phillips | Tramec Sloan |
| 2693-2 | 1/8 | PL1364-2* | 177.13B642 | PHI12-96222 | |||
| 2693-13 | 5/32 | PL1364-25* | 177.13B6425 | PHI12-96555 | |||
| 2693-3 | 3/16 | PL1364-3* | |||||
| 2693-4 | 1/4 | PL1364-4 | 177.13B644 | NP64-4 | PC1464-4 | PHI12-96444 | S264PMT-4 |
| 2693-6 | 3/8 | PL1364-6 | 177.13B646 | NP64-6 | PC1464-6 | PHI12-96666 | S264PMT-6 |
| 2693-8 | 1/2 | PL1364-8 | 177.13B648 | NP64-8 | PC1464-8 | PHI12-96888 | S264PMT-8 |
| 2693-10 | 5/8 | PL1364-10 | 177.13B6410 | NP64-10 | PC1464-10 | PHI12-961010 | S264PMT-10 |
| 2693-12 | 3/4 | PL1364-12 | NP64-12 | PC1464-12 | S264PMT-12 | ||
| 2693-4-6 | 1/4*1/4*3/8 | ||||||
| 2693-6-4 | 3/8*3/8*1/4 | PL1364664 | 177.13B646R4 | ||||
| 2693-6-13 | 3/8*3/8*5/32 |
The fitting is a tee connector, which is connected to the pipeline at all three ends, supporting single inlet and double outlet or double inlet and single outlet pipeline layout, which can optimise the structure of the system and reduce the space occupation.
About the push-in connection design：
No need to use tools, just push the pipe into the interface, the built-in jaws will automatically lock to form a solid connection.
Reduces installation time and increases installation efficiency by more than 50% compared to traditional threaded or ferrule connections.
Easy to disassemble and reuse, just press the release ring to pull out the pipe easily, convenient for maintenance and replacement.
How to Instal and remove?
Ensure that the end of the pipe is clean and free of burrs.
Push directly into the tee connection until the pipe bottoms out.
Gently pull on the pipe to ensure that it is firmly seated.
Press the release ring with your hand or a tool and pull out the pipe.
The pipe can be reinserted for reuse.
The main function of the tee:
Diversion (distribution of fluid/gas)
In a piping system, a tee diverts fluid from a main pipe to two branch pipes.
For example, in an air brake system, a tee can distribute compressed air to different cylinders or valves, ensuring that each component receives an adequate air supply. In water supply systems, tees can distribute water flow to different areas, such as hot and cold water system diversion.
Combining (pooling fluids from multiple lines)
When used in the reverse direction, a tee can bring together the fluid from two branch lines to the main line, thus increasing the flow rate or centralising the flow control. In pneumatic control systems, multiple air lines can be merged into the same actuator through a tee to provide stable air pressure support.
Change fluid direction
Through the tee, the fluid can flow in different directions to achieve 90° steering or multi-directional delivery. In the complex piping layout, the tee can optimise the flow direction of the medium, reduce the space occupied by the pipeline and improve the flexibility of the system layout.
Hot Tags: dot push in union tee, China dot push in union tee manufacturers, suppliers, factory, SAE Flare Male Elbow 90 , DOT end block push fitting, Female Elbow 45 Pipe Fitting, Compression Male Adapter, Brass Push In Female Bulkhead Union, High Pressure Hex Nipple
Previous
DOT Push In Male ConnectorYou Might Also Like
Send Inquiry