
Close Nipple
| Part# | Thread Szie NPTF |
A | PARKER | EATON | ALKON | MAF | GATES | DIXON | Tectran | Automann | Fleet Pride | Fairview | Tramec Sloan |
| 2713-C | 1/8 | 0.75 | 215PN-2 | 3326×2 | 112A-2 | 28131 | G60606-0202 | 1650202C | 112-A | 177.9112A | BP112-2 | 112-A | S215-2 |
| 2713-D | 1/4 | 0.88 | 215PN-4 | 3326×4 | 112A-4 | 28132 | G60606-0404 | 1650404C | 112-B | 177.9112B | BP112-4 | 112-B | S215-4 |
| 2713-E | 3/8 | 1.00 | 215PN-6 | 3326×6 | 112A-6 | 28133 | G60606-0606 | 1650606C | 112-C | 177.9112C | BP112-6 | 112-C | S215-6 |
| 2713-F | 1/2 | 1.12 | 215PN-8 | 3326×8 | 112A-8 | 28134 | G60606-0808 | 1650808C | 112-D | 177.9112D | BP112-8 | 112-D | S215-8 |
| 2713-G | 3/4 | 1.31 | 215PN-12 | 3326×12 | 112A-12 | 28135 | G60606-1212 | 1651212C | 112-E | 177.9112E | BP112-12 | 112-E | S215-12 |
Product Definition and Structural Innovation
Close Nipple is a brass short pipe component with full threads and no center spacing, designed with high-density threads at both ends to achieve zero distance rigid connection of the pipeline system. Its core innovation points include:
Seamless transition structure, with threads extending to the entire pipe body (non polished part), reducing installation space by 40% compared to standard nipple.
Double locking mechanism, with optional reverse threads at both ends (left/right combination) to prevent loosening caused by system vibration.
Precise channel control, with enlarged inner holes (ID tolerance±0.05mm) to reduce fluid turbulence losses.
Breakthrough in Materials and Craftsmanship
Special brass alloy:
High zinc brass (CZ132), with a zinc content of 38-42% and a strength increase of 25% (tensile strength ≥ 500MPa), suitable for high-pressure steam systems.
Low residual copper (C10100), oxygen content<0.001%, electronic grade purity, used in semiconductor ultrapure water systems.
Cold forging precision machining process:
Radial forging, synchronous forging with four hammer heads, grain flow direction consistent with thread direction, fatigue life increased by three times.
Thread rolling instead of cutting forming, with a surface hardness of HV120 (60% higher wear resistance than turning threads).
Special industrial applications
(1) Ultra-high-pressure hydraulic integrated block
For the injection molding machine hydraulic valve group, use a Close Nipple to directly connect the plug-in valve.
Sealing scheme, conical metal seal (without soft materials to avoid extrusion failure).
(2) Particle accelerator vacuum pipeline
The material is oxygen-free copper nickel plating (C10100+Ni), with a vacuum degree maintained at 10-9 Torr.
Special treatment, hydrogen annealing after electrolytic polishing (to eliminate stress and avoid gas release).
(3) LNG cryogenic transportation system
Low temperature adaptation, using Cu Ni Sn alloy (C96900) at -196 ℃, with a shrinkage rate matching the pipeline base material.
Cold welding design, tungsten disulfide coating on the threaded surface (friction coefficient<0.1).
Hot Tags: close nipple, China close nipple manufacturers, suppliers, factory, brass fitting to copper pipe, brass pipeline union, female pex fittings, Female Elbow 45 , brass compression tube fittings, brass quick disconnect
Previous
Countersunk Hex PlugNext
Pipe Long NippleYou Might Also Like
Send Inquiry
















