Reducer Union

Reducer Union

A Precision Reducer Union is an essential tube-to-tube compression fitting engineered to join two lines of different outside diameters (OD) without requiring extra conversion adapters. By streamlining tube size transitions into a single compact fitting, engineers and system integrators can eliminate unnecessary threaded connections, significantly reduce potential leak paths, and save critical space in complex equipment manifolds.
Send Inquiry
Product Introduction

A Precision Reducer Union is an essential tube-to-tube compression fitting engineered to join two lines of different outside diameters (OD) without requiring extra conversion adapters.


By streamlining tube size transitions into a single compact fitting, engineers and system integrators can eliminate unnecessary threaded connections, significantly reduce potential leak paths, and save critical space in complex equipment manifolds.


In modern hydraulic, pneumatic, and process control systems, substandard machining, loose tolerances, or improper material selection can lead to vibration-induced leakage, fluid contamination, and costly system downtime.


Our Reducer Unions are manufactured using high-precision CNC equipment with strict quality controls, providing leak-tight sealing, repeatable re-assembly, and long-term service life under high-pressure and heavy-vibration conditions.

 

Key Advantages & Engineering Features


Direct Tube Transition & Space-Saving Design
Fewer Leak Paths: Reduces threaded and sealed connection points by up to 50%.


Optimized Routing: Enables clean, space-efficient tubing layouts in restricted equipment spaces.


Lower Total Cost: Cuts down assembly labor time and inventory management complexity.

 

High-Precision Machining & Superior Vibration Resistance
Precision Bore Alignment: CNC lathe turning ensures strict concentricity (±0.01mm tolerance) for uniform tube insertion and fluid flow.


Hardened Ferrule Mechanics: Features precision-engineered rear ferrules that provide a reliable mechanical grip on the tube, absorbing vibration and thermal expansion cycles without loosening.


Repeatable Re-sealing: Designed for multiple disassemblies and re-assemblies without degrading sealing surfaces.

 

Comprehensive Material Selection for Harsh Environments

 

Material Grade

Key Characteristics

Typical Industrial Applications

Stainless Steel 316 / 316L

Superior resistance to pitting corrosion, chloride environments, and high temperatures.

Marine equipment, chemical processing, offshore oil & gas, analytical instrumentation.

Stainless Steel 304

High mechanical strength and excellent cost-to-performance ratio for general corrosion protection.

Food & beverage machinery, general industrial fluid lines, hydraulic test benches.

Brass (CA360 / HPb59-1)

High machinability, excellent thermal conductivity, and economical corrosion resistance.

Pneumatic control panels, air distribution systems, automation equipment.

Carbon Steel

High mechanical strength for heavy hydraulic pressure. Treated with Cr3+ Zinc or Zinc-Nickel plating (500+ hours salt spray test resistance).

Construction machinery, heavy hydraulic power units (HPUs), mobile equipment.

 

Technical Specifications

 

Parameter

Specification Details

Product Type

Precision Reducer Union / Reducing Tube Connector

Fitting Design

Twin Ferrule Compression, Single Ferrule, or Hydraulic Flare / Bite Type

Tube OD Range

Metric: 2 mm to 50 mm | Imperial: 1/16" to 2"

Working Pressure

Vacuum to 6,000 PSI (413 bar) (varies by material, tube wall thickness, and operating temperature)

Temperature Rating

SS316: -196°C to 649°C (-321°F to 1200°F) | Brass: -40°C to 200°C | Carbon Steel: -30°C to 120°C

Thread & Tube Standards

Metric (ISO), Imperial (NPT / SAE / BSPT / BSPP), DIN 2353

Traceability

Heat Code Traceability stamped on all Stainless Steel fitting bodies

 

Manufacturing Rigor & Quality Assurance


To ensure consistent performance across high-volume OEM production runs, every batch of Reducer Unions undergoes a rigorous multi-stage quality control process:


Raw Material Inspection (PMI Test)
→ Precision CNC Machining
→ Optical & Dimensional Checks
→ Pressure & Leakage Testing
→ Traceable Packaging


100% Raw Material Verification (PMI Testing)
Every batch of incoming bar stock is verified using X-ray Fluorescence (XRF) Spectrometers to confirm exact chemical composition and material grade before machining.
EN 10204 3.1 Material Test Reports (MTR) are provided with every order.

 

CNC Machining & Tooling Control
Thread profiles, tube sockets, and ferrule seat contours are turned on Swiss-type CNC automatic lathes.
Tooling is regularly replaced to prevent micro-burrs and surface roughness that could compromise seal integrity.

 

Rigorous Batch Inspection
Dimensional Inspection
Measured via:

  • Optical Comparators
  • Coordinate Measuring Machines (CMM)


Thread Gauging
Checked with:

  • Go / No-Go Thread Plug Gauges
  • Go / No-Go Thread Ring Gauges

 

Leak Detection
Available testing:

  • Hydrostatic Pressure Testing
  • Helium Leak Testing for high-purity and gas applications

 

Primary Applications Across Industries


Hydraulic & Power Units
Connecting main high-pressure hydraulic feed lines to smaller branch control lines in industrial machinery, plastic injection equipment, and hydraulic presses.


Factory & Pneumatic Automation
Interconnecting main pneumatic supply lines with individual solenoid valve banks and actuators in automated assembly lines.


Process Instrumentation & Gas Systems
Precision gas sampling manifolds, pressure transmitter connections, and chromatography flow systems requiring reliable leak-control performance.


Offshore & Marine Engineering
Seawater cooling systems, fuel injection systems, and hydraulic steering gear requiring highly corrosion-resistant SS316 fittings.

 

Wholesale Supply & Custom OEM/ODM Services

Tailored Dimensions & Special Alloys
Production available in:

  • Monel
  • Inconel
  • Hastelloy
  • Titanium
  • Custom metric-to-inch reducing sizes

Drawing & CAD Support
Fast turnaround on:

  • 2D production drawings
  • 3D CAD STEP files

Available for engineering review and approval.

Custom Surface Treatments & Marking
Available options:

  • Laser marking with customer logo
  • Part number marking
  • Heat code marking
  • Specialized plating options

 

FAQ

 

Q: What is the main difference between a standard Union and a Reducer Union?

A: A standard Union connects two tubes of the same outside diameter (for example, 1/2" to 1/2").
A Reducer Union connects two tubes of different outside diameters (for example, 1/2" to 1/4") in a single fitting body, eliminating the need for extra reducers or adapters.

Q: Are your Stainless Steel Reducer Unions interchangeable with major fitting brands?

A: Yes. Our double ferrule compression fittings are designed and manufactured to precise tolerances, making them fully gaugeable and compatible with major international fitting systems.

Q: How do I select the right material for my application?

A: Material selection depends on medium, pressure, temperature, and environmental corrosion factors.
Use SS316/316L for corrosive media, marine environments, high-pressure applications, or extreme temperatures.
Use Brass for low-pressure air, water, or non-corrosive gas systems.
Use Carbon Steel for heavy hydraulic machinery where shock loads and high working pressure are key factors.

Q: Can you provide Material Test Reports (MTR) with bulk orders?

A: Yes. We provide EN 10204 3.1 Material Test Reports (MTR) with shipments when required.
These reports document chemical composition, material grade, and heat traceability information for quality auditing.

Q: What is your typical lead time for standard vs. custom orders?

A: Standard metric and imperial sizes in SS316 and Brass are available for quick shipment depending on stock availability.
Custom OEM orders or special alloy products typically require 2–4 weeks depending on production quantity and technical requirements.

Hot Tags: reducer union, China reducer union manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry